After shocking the world of mechanical clocks with H1 and H2 models, the HYT copy Watches team (also known as hydromechanical watchmakers) is ready to marvel at the time indicated by H3 and its linear fluid again.
The 62 mm x 41 mm rectangular case is made of charcoal gray PVD coated titanium and platinum, micro-sandblasted, equipped with a highly complex movement, characterized by linear time description, and the design is opposite to the bellows.
The first one, in the upper left corner, drives the progress of the fluid, thereby driving the time display. Its counterpart on the right compensates for this progression in the capillaries.
This glass tube with a diameter of less than one millimeter runs in a vacuum and contains two fluids, just like what happens in the H1 and H2 models: the first (aqueous) yellow fluid is used for timekeeping; the second (based on viscosity) The translucent fluid faces the meniscus and separates them.
The hour of the day is indicated by a rotating dial with 4 sides arranged along the time display tube. Each of these faces has a 6-hour scale, making it possible to display 24 hours of the day (from 00 to 23). Directly below, from left to right are the balance wheel, retrograde minute indicator and crown position indicator (H means time setting, R means winding).
HYT H3 is probably the most complicated timepiece in the brand’s series. Two barrels can be seen through the sapphire crystal back cover, which can provide a power reserve of 170 hours or 7 days. The power reserve indicator is also located on the back. The vibration frequency of hand wound movement is 21,600 times per hour. replica watches for men