MB & F replica watches

MB&F LEGACY SEQUENTIAL EVO CHRONOGRAPH

Meet MB&F’s first chronograph. Despite having been on the scene for over 15 years, creating 20 different movements to date, the brand has only now introduced a chronograph. Of course, it has to be different. Behind this watch is Stephen McDonnell, head of LM Perpetual, who redefined the mechanism for the perpetual calendar. Using the same approach as a chronograph, McDonnell’s first task was to imagine what such a timekeeping device could do. The result is this Legacy Sequential EVO: one movement, two chronographs and multiple timing modes, including split-seconds and lap timer. With no less than five pushers, it can be used in a variety of ways. Independent mode to measure the duration of multiple events with different start and end points. Simultaneous mode, which measures the separate durations of two events that begin at the same time but have different endpoints. Cumulative mode, which measures a single cumulative duration of two discrete events (eg, a chess game). Sequential mode, measuring individual sub-durations of a single consecutive multi-phase event.

Behind this complexity is the magic provided by the fifth putter at 9 o’clock and the Twinverter mechanism. Powering this watch is an in-house co-developed movement, again stunningly designed and decorated. To make this watch even more versatile, it features the brand’s EVO zirconium case with 80-meter water resistance, an integrated rubber strap, and a shock-resistant mechanism.

44mm zirconium case – sapphire crystal – 80m water resistance – in-house movement designed by Stephen MacDonald for replica MB&F, manual winding, 3Hz frequency, 72 hours power reserve, integrated dual chronograph with two column wheels and Twinverter Switch Mode for Multiple Timekeeping – Integrated Rubber Strap.

Patek Philippe 5470P 1/10 Second Monopusher Chronograph
Chronographs are a Patek Philippe heritage, especially when combined with a perpetual calendar or split-seconds function (or both). The brand has been active in this field for decades, but it wasn’t until the late 2000s that it launched its in-house integrated chronograph movement. Since then, the brand has displayed impressive technical mastery in a rather discreet fashion. For example, the new 5470P 1/10th of a second monopusher chronograph. At first, it seems simple. But it holds no fewer than 31 patents, seven of which are unique to this watch… Although the architecture of this movement is traditional – manual winding, column wheel control, horizontal wheel clutch – it is It has been extensively reworked to increase the frequency by 5Hz and uses two independent timing mechanisms: one for the seconds and instantaneous 30-minute counters, and another dedicated to measuring and displaying the tenth of a second stopped. A silver hand that makes one revolution per minute shows the stopped second hand. The other hand, painted in red, makes one revolution every 12 seconds, five times faster than a normal chronograph hand, sweeping across 12 sectors subdivided into tenths.

Then there’s the look of this fake men watch, which is decidedly modern compared to what we’ve seen at Patek Philippe in the past. The platinum case is based on the split-seconds 5370P, and the matte blue dial combines Breguet numerals, luminous hands and red accents.

41mm Platinum Case – Sapphire Crystal – 30M Water Resistance – Manufacture Caliber CH 29-535 PS 1/10, Manual Winding, 5 Hz Frequency, 48 Hours Power Reserve, Single Push Button Integrated Chronograph with Column Wheel Control , horizontal double – clutch and module for tenths of a second measurement – calfskin strap with embossed fabric pattern.

MB&F-Legacy Machine Perpetual in Palladium

MB&F’s Legacy Machine Perpetual was first launched in 2015 and has since been made of various metals, including red gold, platinum, white gold, titanium and gold.

This year, the Swiss brand launched Legacy Machine Perpetual made of palladium. This new limited edition of 25 pieces is made of palladium 950, a rare lightweight platinum group metal.

The 44mm x 17.5mm case sets off the aquamarine sunray dial, the tone of which varies between light blue, green and gray.

This new Palladium version integrates new ergonomic corrector buttons at 2 o’clock and 4 o’clock. MB&F was first launched in 2020 with the sporty Legacy Machine Perpetual EVO.

The Legacy Machine Perpetual is powered by a fully integrated 581 component movement. Its suspended 14 mm balance wheel vibrates at 18,000 vibrations per hour on the dial side, allowing the wearer to appreciate this fascinating spectacle.

The hour and minute subdial is located at 12 o’clock, between the elegant arches of the balance wheel. Other indications are: day of the week at 3 o’clock, power reserve indicator at 4 o’clock, month at 6 o’clock, retrograde leap year indicator at 7 o’clock, and date at 9 o’clock.

This hand-wound movement is equipped with polished bevels, Côtes de Genève and hand-engraved top finishes. It is equipped with a double barrel and provides a 72-hour power reserve.

Unlike the traditional perpetual calendar mechanism that uses a 31-day month as the default month and “removes” the extra dates in months with fewer days, Legacy Machine Perpetual uses a mechanical processor that utilizes the default 28-day month and adds extra days as necessary. This means that there is always an accurate number of days in each month; there is no fast forward or skip over extra days.

Other advantages of this state-of-the-art movement are that it is equipped with a dedicated quick setting button to simplify leap year adjustment, and to avoid possible mechanical problems, the adjuster button is automatically deactivated when the calendar changes. replica watches usa

MB & F Traditional Machine Flyingt

MB & F Traditional Machine Flyingt, now use the peacock dial The seventh flight rotation enters legacy machine collected, slightly slightly slightly rotated.

After fourteen years of establishment of highly imaginative, Maxbüsser prepares to take risks into female fields for men’s complex watches. In 2019, MB & F launched the heritage machine, the first female watch of the brand. With its 3D installment, spectacular flight gyro and highlighted dome show, LM Flyingt is a combination of micro-machine joy and elegance, feminine victory. The watch is warmly accepted by the watch with a mechanical watch, and the watch goes home in the GPHG award of the same year. Now in the seventh edition, for 2021, Flyingt is mixed with a strong green peacock dial.

LM FlyingT trajectory
When Flyingt debuts in 2019, it provides different diamond settings in three white golden versions. Black paint dial version with diamond kits and two more show off, with full-set bread cutting or wonderful dialing and case. One year later, MB & F adventure entered the finished version of the red gold and platinum without diamonds. At the end of 2020, Split with a gorgeous blue lapis lazuli dial.

Flyingt is a member of the MB & F Heritage Machinery Badman, celebrating the 10th anniversary this year. In the case of deviating from the retro spaceship of fake MB & F, the legacy machine is the translation of Maxbüsser, and he may have been “born in 1867, born in my actual year”. ” Inspired from Voyages Jules Verne and Gustav Eiffel’s project miracle, traditional machine circular cases characterized by bare balance wheels, high-rise sapphire crystals, lacquer registers, Rome numbers and exquisite Haute Horlogerie Gearing.

LM FlyingT fed into the heritage machine in 2019, with a small size of 38.5 mm, diamond. Instead of signing a balance wheel, the aircraft raises a fascinated flying gyro from the mouth-watering flying tourmate wheel. With its high round blue gem crystal (20mm height), you can clearly appreciate complex column construction, support the gyro and logo double arch bridge, this time, with diamonds with diamonds. Another differential factor is an hour and minute dial tilt at a 50 ° angle, so that only the wearer can consult time.

Green
In addition to its strong green, the value of the peacock is the phenomenon called ‘peacock eyes’ – responsible for the swirls and deep green conditions of the swirling and dark green conditions appearing on the gem. Used on the dial plate and the tilt hour and minute counter, the peacock provides a dramatic green background, which is stark contrast with the platinum diamond set.

The asymmetric open frame in the dial plate protrudes above the remaining movement. Paste large diamonds in the top of the cage promptly rotate to the tranquil 2.5Hz rate of the flight gyro. Like the Lapis Lazuli version, the tilt time of 7 o’clock doesn’t have a number, but there is no number of signature snakes. The 38.5mm white gold box has 120 bright diamonds, and there is another diamond. There are also large diamonds at the top of the top, 21 diamond sets in white gold needle buckle (total 168 diamonds).

The unique automatic movement, conception and development of MB & F, using HM6 series and HM7 Aquapod solutions, with sun-shaped winding rotors, impressive for 100 hours.

TECHNICAL SPECIFICATIONS – MB&F LEGACY MACHINE FLYINGT MALACHITE

Case: 38.5mm diameter x 20mm thick – 18k white gold set with a total of 168 brilliant-cut diamonds – high domed sapphire crystal with A/R coating on both sides – sapphire crystal on caseback – 30m water-resistance -2 crowns, winding on left, time-setting on right

Dial: malachite – asymmetric aperture on dial for flying tourbillon – diamond set on top of tourbillon cage – hour and minutes disc with malachite dial at 7 o’clock and inclined at a 50º angle, serpentine hands

Movement: automatic winding 3D vertical architecture conceived and developed in-house by MB&F – central flying 60-second tourbillon – 18,800vph/2.5Hz – 100h power reserve – 3D rotor with sun motif in red gold, titanium and platinum – 280 components – 30 jewels – hours, minutes, flying tourbillon

Strap: calf or alligator leather straps – white gold pin buckle set with 21 diamonds

MB & F replica celebrates 10 years of legacy with new LMX Horology Innovator InnovatorMaxbüsser and his brand MB & F launched a second launch in 2021, traditional machine X. Shortly, the new watch celebrated the first collection of the first time in October 2011, and accompanied by the fascinating HM9 “Blue Polish Vision” Iconoclastic brand is launched in January.

As a ninth watch launched in the LM series, LMX, as well as follow-up in many other legacy machines. At its core, LMX is an interesting, highly luxurious two-level clock, reading the wearer’s time with brand signing mechanical sculpture.

This new Haute Horologerie Creation uses 44 mm, with a thickness of 21.4 mm, made of polished 18K rose gold or 5-stage titanium. The case reminds people of the previous legacy machine. When the first browsing feature, it is on the traditional contour, but the design, manufacturing and finishing of professional execution is displayed when approaching the check. The two upper corners positioned in the housing are two crown, and the right side is used to set the time of the right bottom and carry the engraving of the MB & F combat axis rotor. The left side is installed at 10 o’clock (engraving the potential use of potential use The second time) is set to another time on a left zero.

The highly dome of sapphire crystals cover the three-dimensional partially disclosed dial, produced in the engraving style, where MB & F has become a well-known green CVD or black NAC treatment. It is highlighted that the design mechanical happens immediately caused your eyes; including a floating balance wheel, the center of the dial, two arched bridges, combat axle escapement bridges and three big wheels – each Winding crown, the third is their shared second wheel.

Although the mechanical components on the dial are being fascinated, the watch also has more traditional timing elements. These most obvious are the bodes found in the bottom corners of the dial, each number of times slightly slightly tilted to improve the user’s readability to quickly glance on his wrist. Signed to LMX, each sub-region tells time independently, and due to their tilt design requires specially developed cone gears to better transfer energy from horizontal to vertical planes. The other timing element on the dial is a traditional 12-point position where an unusual hemispherical power reserve is located, showing the user to select a week or 7 days, and rotate when the watch is wound to present the preferred display.

Behind the LMX’s sapphire exhibition, we can see the highly symmetric engine of the watch, such as all MB & F movements, the same name as the watch it resides. Through the design of the campaign is “deep symmetrical”, try to recall “a complete balanced X.” Therefore, we are most consistent with people who have always seen three bucters, located around the center, each of which is highlighted by Côtesdegenève.

As for its technical characteristics, 367 pieces are composed of 367 components at a technical feature of 18,000 Vph frequencies, including 41 jewels. In addition, it has a seven-day power reserve that maintains three of the wire barrels by manual windings. In addition to functionality, the entire mechanism is intricate, using gold Chatons with diamonds, bevel edges, mirror polishing, various sculptures and Geneva. 1:1 Quality Replica wathes

MB&F LMX, 10th anniversary traditional machine

Discount Replica MB&F LM2 Legacy Machine N2 Red Gold 02.RL.W watch

The iconic feature of LM1 reappears with a more interactive and dynamic light to celebrate the 10th anniversary of the watch.

MB&F celebrated the first ten years of its traditional machine with LMX. LMX dates back to the first old version of the machine in 2011, amplifying many signature functions and creating more dynamic glasses. The floating balance wheel is new, the two dials of the independent time zone are now tilted at an angle, more mechanical parts are exposed on the dial, the vertical power reserve indicator has been redesigned, and the autonomy has been increased to 168 hours. LMX may have the signature function of the first old machine, but in fact everything has been reorganized. The only thing that has not changed its position is the balance wheel. Another compelling aspect of LMX is the enhanced interactivity of the watch with a rotating hemisphere power reserve and wheels. There are two limited editions of LMX, one is 18k rose gold with black NAC treatment on the license plate and axle, and the other is grade 5 titanium with green CVD treatment. The next stage of the journey.

When the “old machine” was launched ten years ago, many of the puzzles of MB&F’s interstellar spacecraft were puzzled. They are facing the nostalgic style of replica MB&F, not the unconventional and imaginative “horological machinery” case, but the round, more traditional and more desirable watch.

Did Max Büsser crash into his starship and permanently change the trajectory of MB&F? Far away. Bissell did not fly to the fantasy future for inspiration, but flew back a hundred years ago to explore what kind of watch he would have created if he was born in 1867 instead of 1967. Dive freely into Jules Verne’s fantastic “Voyage”, Gustave Eiffel’s engineering feat and the mechanics and aesthetics of pocket watches, Büsser dreamed of the first Legacy Machine. The balance wheel is a star on the show, just like any work you would like to be released by the MB&F Creative Lab, the balance wheel is not completely hidden under the bottom cover.

Pursuing the dynamic styling charm of all fake MB&F watches, the huge floating balance wheel is placed in the center of the dial, and it is fixed on two white lacquered dials by an arch bridge to maintain its position. With the help of the movement of friend Jean-François Mojon and the impressive and historic finishing of Kari Voutilainen, the LM1 won two prizes at the 2012 Geneva Haute Horlogerie Awards. Awards (public award and best male watch). To learn more about all the older machines produced so far, don’t miss our retrospective article.

The first thing for fans of LM1 to notice is that the two crowns have moved from their original positions at the bottom of the case to the top of the case. Another difference is the elegant polishing of the entire case. The first LM1 shows a mixture of polished and brushed surfaces. The lines of the 44mm case are also more streamlined and refined, with a hollow area extending along the band of the case.

The dynamic 3D architecture and animation of LMX are controlled by elegant symmetry: the two crowns are mirrored by two large gears and two inclined sub-dials on the dial, while the hemispherical power spring indicator is mirrored by comparison. The small balance second wheel leaves the center stage to the floating balance wheel.

The outstanding balance wheel of the LM1 is Büsser’s tribute to the watchmaker who was in love with the perfect adjustment system yesterday. The huge floating balance wheel is located in the center of the dial and runs at a speed of 18,000 vph per hour. The new 13.4mm balance is slightly smaller than the original 14mm balance wheel and is equipped with an inertia block. When adjusting the heart, its accuracy is higher than that of the traditional spiral balance.

The beautiful V-shaped arched bridge above the dial is directly inspired by the architectural elements of the Eiffel Tower. The bridge on the LMX is slightly different from the skeleton bridge of the first replica LM1. It is still V-shaped, but solid and round. More mechanical elements are exposed on the dial, including the components of the gear train and the tomahawk-shaped escapement bridge between the two sub-dials in the lower half of the dial. When the time on the two dials has been set, the two large wheels located next to the crown of each barrel begin to rotate. The third wheel at 6 o’clock corresponds to the small second hand. It is fixed in place by a straight bridge, and its surface is hand-finished to make it have a curved profile and polished by hand.

In addition to excellent animation effects and dynamic appearance, Legacy Machine is also very practical. LM represents two time zones on two separate dials, so the advantage of LM is that each dial can be set independently. Unlike the traditional dual time meter that can adjust the hours, the traditional machine allows you to adjust the hours and minutes. MB&F’s iconic Tomahawk is engraved on the crown at 2 o’clock. The time is set on the right dial and the watch is wound.

A globe is engraved on the crown at 10 o’clock, and the time is set on the left dial. The stretched white lacquered dial with black Roman numerals and blue gold hands, the charm of the Büsser pocket watch dial is no longer on the dial. Like LM Thunderdome and LM Flying T, the dial is now tilted at an angle of 50°. This inclined position adds more architectural interest to the dial. It increases the complexity of the movement, which requires energy to be transferred from the horizontal plane to the vertical plane through a bevel gear.

Going back in time to capture the spirit of traditional machines, Bissell will undoubtedly put a sextant in his suitcase, which is a kind of navigator that can determine the angle between the horizon and celestial bodies such as the sun. The traditional machine in 2011 was designed to look like a miniature sextant, with the world’s first vertical power indicator. The two curved arms of the pointer rise from the dial above 6 o’clock to echo the curved arms of the bridge on the balance wheel. fanreviewwatch.com

The LMX has a power reserve indicator, but it has been repositioned until noon and its hemispherical architecture has been reinterpreted. With a new and improved power reserve of 168 hours/7 days (LM1 has 45h), this indicator provides two different methods to measure the amount of fuel remaining in the tank. Two markers on opposite sides of the hemisphere convert the number from 1 to 7 on one number, and convert the number from the day of the week to a number on the other. By rotating the power reserve display, you can choose your preferred display mode. If you choose the right time and wind the watch on Sunday, you can rotate the sphere and enjoy the display of the day of the week. If you are more forgetful, the digital indicator will let you know when to wind up. The 2 o’clock crown engraved with the battle axe is responsible for rotating the power reserve display, adding another interactive element to the watch.

Of course, the LMX is equipped with a spectacular high domed sapphire crystal, which stands on the dials of all Legacy Machines. The huge height of 21.4 mm (only smaller than the 22.2 mm of Tri-Axial LM Thunderdome) can ensure viewing pleasure.

The manual winding 367 movement is exclusively developed by MB&F. It is equipped with three barrels and provides a powerful 7-day (168h) power reserve. The tight symmetry of the dial continues the movement, with its three barrels evenly arranged in the center. The tilt angle of the interior, the polished tilt angle, the Côtes de Genève on the bridge and the high attention to detail can all appreciate the most advanced handcraft style of the 19th century.

LMX will provide two initial versions: 18k gold and grade 5 titanium. The black hand-stitched crocodile leather strap and the red gold model are matched with a red gold folding clasp; the titanium model is equipped with a gray hand-stitched crocodile leather strap and a titanium folding clasp.

TECHNICAL SPECIFICATIONS – MB&F LMX

Case: 44mm diameter x 21.4mm height – 18k red gold or grade 5 titanium, polished – two crowns at 10 and 2 o’clock – high domed sapphire crystal with anti-reflective coating both sides, front and back

Dial: red gold model with black NAC treatment – titanium model with green CVD treatment – two independent dials for dual time functionality – small seconds at 6 o’clock – floating balance wheel in centre held in place by large arched bridge – hemispherical power reserve indicator at 12 o’clock – battleaxe-shaped escapement bridge – exposed wheels at 2 and 10 o’clock rotate when crowns are activated

Movement: 3D horological movement developed exclusively by MB&F – manual-winding with three barrels for 168h/7-day power reserve – 13.4mm floating balance wheel with inertia blocks – 18,800vph/2.5Hz – 367 components – 41 jewels – gold cahtons with diamond countersinks – superlative 19th-century style hand finishings throughout – hours and minutes on two independent dials (dual time), running seconds, rotating hemispherical power reserve

Strap: 18k red gold model with black alligator strap with red gold folding buckle – titanium model with grey alligator strap with titanium folding buckle

Collector series Todd Searle and his MB&F HM7 Aquapod Titanium Blue

A rare opportunity to see one of MB&F’s most brutal watches.

Today, we are talking to people who bought MB&F. Although MB&F’s design has been very “popular” (remember the gorgeous falling LM1 owned by @winewhiskeywatches), today’s collectors have become one of the most unusual designs in the watch world. Today’s collector is not necessarily a long-term watch collector, but he focuses on the extraordinary and creative side. His name is Todd Searle, and his business card says “general creator”. He is both a writer, a content creator, and a sales specialist. Todd must be MB&F Horological Machine HM7 at first glance. Let’s find out why this bold watch attracted this collector from Chicago, Illinois.

Have you always been a fan of MB&F?

Todd Searle – Since the first time I saw the product online, I have fallen in love with MB&F. I am a relatively new collector, and the concept of watches at the time prevented me from considering owning MB&F. Too many people tell me that this watch will lose its value, and if I decide to sell it, I will never make money. I continue to be attracted by Max’s amazing products and have always been fascinated by the creativity of watches and how they differ from other products on the market. I know Max Büsser’s creativity is incredible, so I want to learn more about his watches.

When writing the book “32 Regrets: A Guide to Creativity”, I had the opportunity to communicate and interview with Max, and I was immediately attracted by his watchmaking methods. It is obvious to me that Max wants to make the watches he wants to see in the world, regardless of whether other people like them. He wanted to create because he had a vision, that is, to use traditional watchmaking technology and expose it to the human eye for observation instead of putting it on the bottom cover. Max’s vision is to create 3D mechanical art that can also explain time. In our interview, Max’s passion and creative drive were so clear. I am absolutely obsessed with this.

What makes this brand so special?

As I became a more confident fake watch collector, I started to research and add more independent brands to my collection. I began to understand the spirit, the product, and the reasons why independent watches are so different from mass-produced watches. When I became more satisfied with my series, I knew that I wanted to add MB&F to the series. There are a lot of great works, I’m not sure where to start.

In an interview with Max, I talked to him about his creative process. His answer touched me, and I still think he performed equally well on HM1 today. He told me: “The creative process is my vision for watchmaking. This is a very, very personal vision involving three-dimensional works of art. I want to fundamentally deconstruct and reconstruct the traditional watchmaking industry that I like. For 3D sculpture, by the way, this gives you time.

I admire Max’s willingness to rethink traditional watchmaking craftsmanship and look at it with a new perspective, seeking new shapes and sizes that are not suitable for traditional watchmaking craftsmanship. The brand I just liked has traces of rebellion.

Why is this special watch so prominent to you?

At this point, I started searching for my first MB&F. I like the more traditional Legacy Machines and think the LM1 is an excellent watch. The LM1, despite being different, still has the feel of other more traditional watches in my collection. I like the rest of the Legacy Machine series and think that these watches represent a beautiful and innovative series, but I know that my first MB&F cannot be similar to any other watch. You would not go to MB&F to buy traditional watches, would you?

For me, it depends on the watch mechanics. For starters, these are the craziest designs of MB&F. Max’s ideal of 3D mechanical art embodies as much time as the Horological Machine series. There were nine options at the time, and I was taking the time to decide which one I liked. I happened to see that there are several watch machines on the market and would like to know about buying other watch straps from MB&F.

At that time I was fortunate to be able to contact Thibault Verdonckt, MB&F’s International Sales Director. We started a conversation, started talking about this book, how he found the way of MB&F, and why he was so fascinated by my product. Thibault helped solidify my appreciation for the MB&F team and its work.

I have limited my choice to just two watches. This is no longer a question of whether to ask, but when to ask. I know I have a difficult decision-I feel very painful between HM5 and HM7. Then, as a grown-up swimmer, learned to dive and like to be in the water whenever possible, I know what watch I must own: HM7.

We ended our conversation with Thibault and asked if I needed to look for any watches in particular. When I mentioned HM7 Aquapod Titanium Blue, I could almost hear his smile on the phone. He just participated in the game. The timing couldn’t be better.

Tell us more about the watch of your choice.

The origin story of this watch is the story of Max’s wife being stung by a jellyfish, which is really great. I like how these moments and details of his life fit into his watchmaking industry. This is a great design inspiration, whether on the wrist or on the wrist, the watch does have a jellyfish feel. The antennae of the winding rotor does indeed play a role in the bulbous shape of the watch. The tourbillon at the top of the watch is the icing on the cake. It is fascinating to watch its spinning. I can watch the ticking of this watch all day long. I found that HM7 is not too busy visually, I can check the time quickly, but if I have time to distract, the rotor, tourbillon and night light will attract me. The glow of this watch is crazy. The light is not only everywhere, it also adds depth to you. It feels like you are watching sea fish swimming.

I chose the blue titanium version because I am a big fan of blue and I like the way the watch is read. It has the feel of a nautical compass, and although it is a large watch, it can be worn perfectly on your wrist. In addition, since it is titanium, its presence is hardly noticed. I like everything about this watch and how it is worn. And I wear it often. For me, this is the perfect embodiment of MB&F’s design spirit and execution. It feels like a sculpture, no matter where I go, I can take it with me and appreciate it whenever I look at my wrist. When I see it on my wrist, I smile without hesitation. I often joked with my friends that this is my favorite weekend watch, and I can hardly say that it is more outgoing than the AquaPod watch.

All in all, I can completely transform into Max’s thoughts. I think Max has successfully completed his vision of deconstructing the traditional watchmaking industry, reconstructing it into a three-dimensional mechanical art and exposing the watchmaking industry to everyone’s appreciation. I am deeply grateful for the introduction of Max&Max and MB&F, and for bringing such a unique, well-thought-out and outstanding performance product to the market.

What reaction will I get when I wear HM7?

I received interesting responses from collectors and friends. Many people regard it as a statement of personality, and although I do not disagree, I think everyone can appreciate the depth and beauty of this watch. Some watch collectors immediately knew what this watch was and had a strong response to it. Collectors often say that they like watches, but they cannot wear them because of their size. Friends commented that it is very different from other watches. They want to know how to use time to tell the time and understand the story behind the watch. I like to tell the inspiration story of this watch. Most of the time, I wear a watch for myself, but it feels like a watch, allowing me to become an ambassador for watch enthusiasts and novices, and share why watches are so special and beautiful.

How about the rest of your collection, will it expand with other watches?

As for the future, replica MB&F has more watches that I am interested in. I like the idea of adding Legacy Machine to my collection. I often think of the traditional machine No. 1. It was created for very practical purposes. It can distinguish the time in two different time zones, one of which includes half-hour shifts. I also like Legacy Machine Perpetual. Stephen McDonell (Stephen McDonell) designed an ingenious movement to prevent damage to the watch, and there is no need to use a stylus to set any functions of the watch. The completely hollow movement feels that the machine is still alive on the wrist, and I personally like it very much. The combination of LM Perpetual YG gold and blue chassis is my favorite among current products.

MB&F HM9 SV, sapphire case

The new meaning of the skull replica watch! MB&F HM9 SV, sapphire case

MB&F has always been a brand that breaks the limits of the watchmaking industry. Whether it is related to the time display method or the case design method, the boundaries will always be broken. HM9 is a good example-MB&F has created a brand new watch. Inspired by cars and airplanes from the 1940s and 1950s, this watch has two balance wheels and a vertical time display. The case itself really looks like airplanes and cars of that era, with aerodynamics as the focus.

The original watch was made of titanium and gold, and fake MB&F broke the boundaries further with the HM9 SV. SV has a sapphire and gold case, allowing the wearer to see the entire movement. Crazy, right? Accompanied by the patented 3D gasket, this is the first time a watch company has performed such an operation, and the amount of processing that makes this case lifelike is shocking. Max Busser said in an interview that the sapphire that the original HM9 used to display the flying balance took 60 hours to manufacture. Imagine what happened in the whole case!

HM9 has four colors. Black, blue, rose gold and our personal favorite purple, limited edition.

MB&F-Watch Machinery N°9 “Sapphire Vision”

At the end of 2018, MB&F launched one of their most aggressive watchmaking machines, the HM9 “Flow”.

In 2021, this Geneva-based brand further launched the new HM9 “Sapphire Vision”. Thanks to the transparent sapphire crystal casing, the HM9 engine is now shown in all its amazing details.

HM9’Sapphire Vision’ is inspired by the design route of cars and aviation in the middle of the last century, and is reminiscent of jet engines in a way. There are four versions, each limited to five pieces: two versions with 18K white gold mirrors Frame with PVD-coated purple or red gold-plated engine, and two versions of 18K 5N + red gold frame, and PVD-coated blue or NAC-coated black engine.

The fake men watch case is characterized by the outer hull of sapphire crystal and precious metal, bent and blistered, and divided into three parts precisely, and sealed by a proprietary combination of patented three-dimensional gaskets and high-tech composite bonding process to ensure Water resistance reaches 3 ATMs (approximately 30 meters / 100 feet).

Two independent balances pulsate slowly at a frequency of 2.5 Hz (18,000 vibrations per hour), providing two sets of timing data, which can be differentially converted to produce a stable average reading.

The bevel gear rotates the energy and information current of the engine by 90 degrees to input the time display on the sapphire crystal dial, and is marked with Super-LumiNova, which can enhance the clarity in low-light environments.

On the contrary, under each balance coaxially, we found two spherical turbines, which rotate freely and become elements of pure visual interest.

The HM9 engine is composed of 301 parts and 52 jewels. It is equipped with a single barrel and can run automatically for 45 hours after being fully wound up.

The size of the watch is 57mm x 47mm x 23mm, and it is secured to the wrist with a red or white gold folding clasp that matches the case with a hand-stitched brown or black alligator leather strap.

MB&F HM8 Only Watch: a symbolic product designed to help children with myopathy

In order to make such a replica swiss watch, the Swiss Watch Company asked a very special artist to create the most unique work: Cassandra Legendre, a 15-year-old young Spanish artist Putting all its creativity at the core of HM8, the “watch only” function perfectly blends the childish appearance and the most exquisite design.

The basis of the HM8 “Only Watch” watch is the design of MB&F’s iconic Horological Machine N°8, which was created as a tribute to the famous American Can-Am racing car. Today, creativity leads to childish creativity: I painted Cassandra Legendre’s work on its sapphire crystal, and reproduced this work with metal engraving, showing a certain amazing Imagination: robots, jellyfish, jet planes, excellent dials decorated with ice cream cones, footballs, video game controllers, sunglasses and many other symbolic elements of childhood.

However, it turns out that this is only the most poignant representative of HM8 “Only Watch” is indeed the elephant: this animal has softness, impressive strength and obvious size at the same time, and is a perfect reference for children. Suffering from myopathy, at least this is what the budding artist Cassandra Legendre said. This refined platinum elephant is molded in three dimensions under the safety ring of the work. This effect is achieved due to the optical prism, giving the impression of a mini sculpture: an extraordinary rendering effect requires no less than 120 hours . Therefore, this kind animal turned out to be one of the core characters of the smiling HM8 “Only Watch” (watch only). This symbolic figure is made from a platinum record. Through it,

HM8 “Only Watch”, as its name implies, is a unique work with multiple symbols, which will be auctioned on November 11 to commemorate a noble cause: helping children with Duchenne muscular dystrophy.

MB&F-Golden Eternal Machine

Discount Replica MB&F LM4 Legacy Machine Perpetual Platinum 03.PL.W watch

Legacy Machine Perpetual was first launched by MB&F in 2015 in red gold and platinum versions, followed by white gold and titanium versions, and now there are also 25 limited editions, featuring a vivid blue dial and 44mm gold case.

LM Perpetual is different from many perpetual calendars. These perpetual calendars are installed as modules installed on existing movements, while LM Perpetual is driven by a fully integrated 581 component movement, which was developed from scratch to achieve optimal efficiency .

An example can help understand the benefits of this approach. The traditional perpetual calendar mechanism uses the default 31-day month, and basically “deletes” the redundant dates in the months with fewer dates by quickly forwarding the redundant dates during the conversion process. The traditional perpetual calendar is changed from February 28 to March 1. It can quickly scroll to the 29th, 30th and 31st to reach the 1st.

LM Perpetual uses a patented “mechanical processor” instead of the traditional space-consuming dam (large lever) system architecture. The mechanical processor uses the default 28-day month and adds additional days as needed. This means that each month always has the exact number of days needed; there is no fast forward or skip over extra days.

Other benefits are that the adjustment of the year is simplified with the help of a dedicated quick setting push rod, and in order to avoid problems with the mechanism, when the calendar changes, the adjustment push rod is automatically closed.

The complete complication is displayed on the side of the dial, below the 14 mm suspension balance. The balance can vibrate 18,000 times per hour and has a 72-hour power reserve.best quality replica watches

The hour and minute dials are located at 12 o’clock between the elegant arches of the balance. Other indications include: day of the week (3 o’clock), power reserve indicator (4 o’clock), month (6 o’clock), retrograde leap year indicator (7) and date (9 o’clock).

Through the sapphire crystal back cover, you can appreciate the fine hand finishing with internal bevels, polished bevels, Côtes de Genève and hand-engraved.

MB＆F-Legacy Machine No.2 Red Gold Blue

To pay tribute to the rarest mechanism in the history of watchmaking, the dual regulator MB&F Legacy Machine No.2 was first launched in 2013 and is issued in a limited edition of 950 rose gold, white gold and 18 platinum. In 2017, 18 pieces of titanium green face commemorative edition were added, and in 2018, a limited edition of 12 pieces of platinum gold and purple face commemorative face was launched.

This year, MB&F will reuse red gold with a dark blue dial, which has a striking color obtained through a chemical vapor deposition (CVD) process.

The Legacy Machine No. 2 Red Gold Blue dial on display on the domed sapphire crystal cupola is an example of perfect symmetry. The white extended lacquer dial at 12 o’clock and the blue hour and minute hands, with a protruding large differential at 6 o’clock, are visually balanced. Moreover, from left to right, the two balance springs and their escapements are the same mirror image, all the way down to the position of the stud holder that secures the balance spring.

The planetary differential has three functions: 1) transmit power to each regulator, 2) receive a separate timing rate from each balancer, and 3) transmit the average rate of the two regulators to the gear train, and finally it It is expressed as the displayed time.

The Legacy 2 movement was developed by the award-winning watchmaker Jean-François Mojon (the best watchmaker at the 2010 Geneva Haute Horlogerie Awards) and his team at Chronode, and meets swiss MB&F specifications. Another independent senior watchmaker, Kari Voutilainen, ensures that the aesthetic style of the movement is consistent with the high-quality traditional timepieces of the 19th century.

The names of the two people responsible for this movement are engraved on the back. The two balance wheels beat slowly at a frequency of 18,000 vibrations or 2.5 Hz per hour and have 45 hours of autonomy.